Amplifies the sound of water escaping under pressure so we can hear the leak through concrete. It's the fastest way to narrow down the location before we cut.
Slab Leak Detection and Repair gilbert AZ You Can Count On
When water starts pooling where it shouldn't, slab leak detection and repair gilbert AZ homeowners trust starts with finding the source before tearing into concrete.
Serving gilbert and nearby areas.
How big is the job?
Multi-section
Two or more leaks or a longer damaged run.
- 1. Spot repair One isolated leak in an accessible section of pipe.
- 2. Multi-section Two or more leaks or a longer damaged run.
- 3. Full repipe Whole under-slab system replaced, planned in writing first.
Drag the needle to compareTouch and drag the needle
- 23Services from one local team
- 27Areas served around gilbert
- Camera firstWe confirm the leak before cutting.
- Pressure testWe verify the repair before closing.
What's Included in Our Slab Leak Service
Every slab leak job is different, but here's what you can expect when you hire us for slab leak detection and repair in gilbert AZ.
Work order
Slab Leak Detection and Repair- Full System Pressure Test: We pressurize your entire plumbing system and isolate the hot and cold lines to confirm the leak is under the slab and not coming from a fixture or water heater. This step prevents us from chasing the wrong problem.
- Acoustic and Camera Detection: We use a leak detection acoustic listening device to hear the leak and a pipe camera inspection system to see the pipe condition. Together, these tools tell us exactly where to cut and what material we're working with.
- Pipe Repair or Section Replacement: We cut out the damaged section and replace it with copper pipe, PEX tubing, or SharkBite fittings that match your existing system. All joints are soldered or pressed to Uniform Plumbing Code standards.
- Concrete Patch and Cleanup: After the repair passes a pressure test, we backfill the access point and patch the concrete. We clean up the work area and haul away debris. You get your floor back, not a construction zone.
- Written Summary and Photos: You receive a written summary of what we found, what we repaired, and photos of the pipe before and after. This documentation is what you need for a slab leak insurance claim gilbert Arizona and for your own records.
What the first visit covers
First visit
We pressure-test the system, listen for the leak, run a camera to confirm the location, and mark the repair point.
Slab leak repair at your home
We handle slab leaks in houses across Gilbert, from single rooms to whole floors.
Hot spot on floor
We find the hot water leak and repair it.
Water bill spike
We isolate the leak and stop the waste.
Running water sound
We pinpoint the break and fix the pipe.
Cracked tile or baseboards
We stop the water and assess the damage.
Slab leak repair for Gilbert businesses
We work with property managers and business owners to keep water off the floor and doors open.
Restaurant floors
We repair leaks without closing your kitchen.
Retail spaces
We schedule work around your business hours.
Office buildings
We isolate the leak and minimize disruption.
What Slab Leak Detection and Repair gilbert AZ Really Involves
A slab leak is water running where it shouldn't, under your floor, every minute of the day. Fixing it properly means finding the exact spot, repairing the pipe to code, and testing before we close the slab. That's how we keep your floors dry and your water bill normal.
Slab leak detection and repair gilbert AZ is the process of locating water escaping from pipes running beneath your home's concrete foundation and fixing it without unnecessary demolition. We start by pressurizing the system and listening for the distinct hiss of a pinhole leak with a leak detection acoustic listening device. From there, a pipe camera inspection system confirms the exact location and pipe material. Once we know what we're dealing with, we cut out the damaged section with a tube cutter and replace it using copper pipe, PEX tubing, or SharkBite fittings depending on what your home already has.
Gilbert's hard water scale buildup is brutal on older copper lines. Homes built in the 1980s and 1990s around the Heritage District and Glenbrook Village are hitting the age where slab leaks become common. Add Arizona's extreme temperature swings, and the soil under your slab expands and contracts enough to stress pipe joints year after year. If you've noticed a hot spot on the floor, the sound of running water when nothing's on, or an unexplained jump in your water bill, it's time to call a slab leak plumber gilbert homeowners rely on for accurate diagnosis.
- What it is
- Water escaping from a pipe under your concrete slab.
- When it helps
- Hot spots, high water bills, or running water sounds.
- What you get
- A located leak, a code-correct repair, and documentation.
How Our Slab Leak Repair Process Works
From the first phone call to the final pressure test, here's exactly what happens when you hire us for slab leak detection and repair in gilbert…
Tools and Methods We Use for Slab Leak Detection
Each method answers a different question. Together they leave very little to guess.
Feeds a camera through the pipe to show us the leak, the pipe material, and the condition of the surrounding line. We use it to confirm the repair plan before cutting.
Cuts copper pipe cleanly without deforming the end. A clean cut means a better solder joint and a repair that lasts.
Connects PEX tubing and press fittings without a torch. It's faster and safer than soldering in tight under-slab spaces.
Used for soldering copper pipe joints when we're doing a copper-to-copper repair. We keep a fire watch and protect surrounding materials.
When Gilbert Homeowners Need Slab Leak Detection
You're getting ready to sell your Gilbert home and the inspection report flags a slab leak.
We provide fast detection and repair with full documentation, including photos and a written summary.
HomesYour home was built in the 1990s and you've already had one slab leak repaired.
We inspect the entire under-slab system, not just the current leak.
HomesYou're remodeling a bathroom and want to check the under-slab pipes while the floor is open.
We pressure-test the lines and run a camera through the exposed pipes.
HomesYour water bill doubled and you can't find a leak anywhere inside the house.
We check every fixture, the water heater, and the irrigation system first.
Homes
How Slab Leak Repair Works in Gilbert, Arizona
Gilbert's water is hard. That's not a sales pitch, it's a fact that shows up in every copper pipe we cut open. The scale buildup restricts flow, raises pressure, and eventually creates pinhole leaks.
Gilbert Heritage District
Older homes with original copper lines that have been through decades of hard water. These are prime candidates for pinhole leaks and scale-related failures.
Power Ranch
Built mostly in the 2000s, these homes have PEX and copper systems. We see leaks at fitting connections where soil movement has stressed the joints.
Morrison Ranch
Newer construction with complex under-slab layouts. Detection takes longer because there's more pipe to check, but the leaks are usually isolated to one section.
- Gilbert Heritage District
- Power Ranch
- Morrison Ranch
- Val Vista Lakes
From problem to finished result.
Slide to compare the photo with an illustrative inspection view. It is generated from the photo, not a measurement.
PhotoHot Water Leak Under Kitchen Tile
Before: The tile was warm to the touch, and they could hear water running when everything was off.
After: We located the leak in the hot water line within 45 minutes using acoustic listening. The repair took four hours, including cutting a small access point, replacing a section of copper pipe, and patching the concrete. The water bill returned to normal the next month.
Pinhole Leak in 1990s Copper Pipe
Before: A home in Glenbrook Village had a pinhole leak in the cold water line. The homeowner noticed water seeping up through the grout in the hallway and called us after another company quoted a full repipe.
After: We used a pipe camera to confirm the leak was isolated to one section. The repair passed pressure testing and the floor was patched the same day.
Slab Leak Causing Foundation Cracks
Before: A homeowner in Power Ranch saw cracks appearing in their tile and baseboards pulling away from the wall. The water bill had been creeping up for months. They worried the foundation was failing.
After: We found a slab leak in the hot water line that had been running for months. After repairing the pipe and patching the slab, we monitored the soil moisture. The cracks stopped spreading once the water was shut off.
Slab Leak Problems We Solve for Gilbert Homeowners
A slab leak is never just a plumbing problem. It's a flooring problem, a mold problem, and a water bill problem all at once.
Hot spots on the floor with no explanation
A hot spot means hot water is escaping under your slab and heating the concrete.
Water bill spikes without changed habits
A pinhole leak can waste thousands of gallons a month.
Sound of running water when everything is off
That sound is water moving through a broken pipe under your floor.
Cracks in tile or baseboards pulling away
When soil under your slab gets saturated, it expands and shifts. That movement cracks tile and separates baseboards.
Why Gilbert Homeowners Call Us First
A slab leak doesn't fix itself, and waiting only makes the damage worse.
Stop Water Damage Fast
Every hour a slab leak runs, it saturates your subfloor, warps hardwood, and breeds mold.
No Guesswork, No Unnecessary Demolition
We don't jackhammer a whole room hoping to find the problem. Acoustic listening and pipe camera inspection pinpoint the leak within inches.
Code-Correct Repairs That Last
We use copper pipe, PEX tubing, and quality fittings from brands like SharkBite and Moen.
Straight Answers on Cost and Insurance
We give you a clear price before we start and document everything for your insurance claim.
Slab Leak Detection and Repair Pricing
We give you a written price before we start, and it doesn't change unless you approve additional work.
Included
Quoted after a first look
- Full System Pressure Test
- Acoustic and Camera Detection
- Pipe Repair or Section Replacement
- Concrete Patch and Cleanup
What changes the scope
Quoted after a first look
- Access Difficulty
- Pipe Material
- Leak Location
- Number of Leaks
What you receive after the job
Clear records you can keep and share.
Written findings
A summary of what we found and repaired.
Pipe photos
Before and after images of the repaired section.
Pressure test record
Confirmation the line holds pressure.
10 Years Finding Leaks Under Gilbert Slabs
We've been fixing slab leaks in Gilbert since 2016.
Pressure gauge
We read the drop to confirm which line is leaking.
Acoustic device
We listen for the loudest point to mark the spot.
Camera feed
We see the pipe condition and confirm the leak visually.
Is your gilbert area covered?
Type your ZIP code or neighborhood and we will confirm. If yours is not listed, ask.
gilbert ZIP codes
- 85233
- 85234
- 85236
- 85297
- 85296
- 85295
- 85298
- 85244
- 85299
Towns we serve.
Based in gilbert and covering the places around it. Pick one for local details.
What Gilbert Homeowners Say About Us
The team came out the same day, found the leak under the slab with their listening equipment, and had it repaired by dinner. They patched the concrete and cleaned up so well you couldn't tell anyone had been there.
I was worried they'd have to tear up half the house. They used a camera to pinpoint the leak within a few inches and only cut a small section of concrete. The repair was done in about five hours. They also gave me photos and a write-up for my insurance claim, which got approved without a fight.
Our home was built in 1998 and we'd already had one slab leak repaired by another company. When the second one hit, we called these guys. They found it fast and showed us the pipe was full of scale. We ended up repiping the whole house with PEX. No leaks since, and the water pressure is better than ever.
Common Questions About Slab Leak Detection and Repair in Gilbert
Short answers for the first few minutes. The team can cover the rest.
Still have a question?
Describe what you are seeing and we will point you to the right next step.
+14802885094If the leak is under tile, expect the higher end because we have to remove and replace flooring. We give you a written price before any work starts.
The three biggest signs are a hot spot on the floor, the sound of running water when all fixtures are off, and a water bill that jumped without explanation. Some homeowners also notice cracks in the tile or a musty smell near baseboards. If you catch any of these, call for detection before the damage spreads.
It depends on your policy. Many Arizona policies cover the water damage and access costs but not the pipe repair itself. We document everything with photos and a written summary so you can file your claim with confidence. Our team has worked with most major insurers in Maricopa County.
Detection takes about an hour. The repair itself usually runs four to six hours, including the concrete patch. If we're dealing with a simple copper pinhole, you're looking at a half-day. More complex jobs under tile or in tight access areas can stretch to a full day.
Other Plumbing Services We Offer in Gilbert
Other services from the same team.
Get Slab Leak Detection and Repair gilbert AZ Today
+14802885094Water under your slab won't wait, and neither should you. Call us now for same-day detection and a clear price on the repair.
Contact pro plumber gilbert
Call +1 480-288-5094 or email info@proplumbergilbert.com and we will get you on the schedule. Tell us what you are seeing and we will tell you what it likely is before we even arrive.